CXD Valve Company aim to develop BS valve .
Now we can supply below items:
Contact: sales@qdmarinevalve.com
| BS 10-1962 | 管子、阀门和配件用法兰和螺栓连接规范 | Specification for flanges and bolting for pipes, valves, and fittings |
| BS 1010-2-1973 | 供水设备(旋压式)用放水旋阀和截止阀规范.第2部分:放水旋阀和地面上截止阀 | Specification for draw-off taps and stopvalves for water services (screw-down pattern) - Draw-off taps and above-ground stopvalves |
| BS 1212-1-1990 | 浮子阀.第1部分:活塞式浮子阀(铜合金阀体)(不含浮子)规范 | Float operated valves - Specification for piston type float operated valves (copper alloy body) (excluding floats) |
| BS 1212-2-1990 | 浮子阀.第2部分:隔膜式浮子阀(铜合金阀体)(不含浮子)规范 | Float operated valves - Specification for diaphragm type float operated valves (copper alloy body) (excluding floats) |
| BS 1212-3-1990 | 浮子阀.第3部分:仅供冷水用隔膜型塑料体浮子操作阀(不包括浮子) | Float operated valves - Specification for diaphragm type float operated valves (plastics bodied) for cold water services only (excluding floats) |
| BS 1212-4-1991 | 浮子阀.第4部分:厕所冲水箱用小型浮子阀规范(包含浮子) | Float operated valves - Specification for compact type float operated valves for WC flushing cisterns (including floats) |
| BS 1552-1995 | 压力可达200毫巴家庭用一类、二类和三类燃气敞口底部锥形旋塞阀规范 | Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200 mbar |
| BS 1560-3.2-1990 | 管子、阀门和接头(规定等级)用圆法兰.第3部分:钢、铸铁和铜合金法兰.第2节:铸铁法兰规范 | Circular flanges for pipes, valves and fittings (Class designated) - Steel, cast iron and copper alloy flanges - Specification for cast iron flanges |
| BS 1655-1950 | 过程控制工业用法兰连接自动控制阀(面至面尺寸)规范 | Specification for flanged automatic control valves for the process control industry (face-to-face dimensions) |
| BS 1868-1975 | 石油、石化及联合企业用钢制单向阀(有法兰及对焊端)规范 | Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
| BS 1873-1975 | 石油、石化及有关工业用钢球形阀、球形截止阀与单向阀(有法兰及对接焊端)规范 | Specification for steel globe and globe stop and check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries |
| BS 1968-1953 | 球阀用浮球(铜)规范 | Specification for floats for ballvalves (copper) |
| BS 2456-1990 | 冷水设备用浮子操作阀的浮子(塑料制品)规范 | Specification for floats (plastics) for float operated valves for cold water services |
| BS 2767-1991 | 散热器用手动控制铜合金阀的规范 | Specification for manually operated copper alloy valves for radiators |
| BS 2782-11 Method 1108A-1989 | 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1108A:管界面限定碰撞率 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - True impact rate (TIR) boundaries of pipes |
| BS 2782-11 Method 1109A-1989 | 塑料试验方法.第11部分:热塑性塑料、接头和阀门.试验方法1109A:非承压聚乙烯管和接头耐坏境应力开裂性 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications |
| BS 2782-11 Method 1110-1989 | 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1110:非承压聚氯乙烯槽形管哑铃状试样的抗拉性能 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Tensile properties of dumb-bell specimens from PVC gutter profiles of pipes for non-pressure applications |
| BS 2782-11 Method 1121B-1997 | 塑料的试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121B:额定外部直径和额定压力.米 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Metric series |
| BS 2782-11 Method 1121C-1997 | 塑料试验方法.第11部分:热塑管、接头和阀门.流体输送用热塑管.试验方法1121C:额定外部直径和额定压力.英尺 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the conveyance of fluids - Nominal outside diameters and nominal pressures - Inch-based series |
| BS 2782-11 Method 1121H-1996 | 塑料试验方法.第11部分:热塑性塑料管、接头和阀门.试验方法1121H:非承压液体输送热塑性塑料管.管头损失计算 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes for the transport of liquids under pressure - Calculation of head losses |
| BS 2782-11 Method 1127P-1997 | 塑料试验方法.第11部分:热塑管,接头和阀门.液体输送用热塑材管.试验方法1127P:抗内压力.试验方法 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Thermoplastics pipes, for the conveyance of fluids - Resistance to internal pressure - Test method |
| BS 2782-11 Method 1150B-1998 | 塑料试验方法.第11部分:热塑管,接头和阀门.塑料管道和配件.试验方法1150D:对接熔融法聚乙烯(PE)管/管或管道 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| BS 2782-11 Method 1150E-1997 | 塑料试验方法.第11部分:热塑性塑料管,接头和阀门.试验方法1150E:塑料管和配件.聚乙烯管和电熔融接头间试件 | Methods of testing plastics - Thermoplastics pipes, fittings and valves - Plastics pipes and fittings - Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| BS 2S 111-1964 | 飞机材料规范.镍铬钨阀门钢 | Specification for aircraft material - Nickel-chromium-tungsten valve steel |
| BS 341-3-2002 | 可运输气体容器的阀门.阀门出口接头 | Transportable gas container valves - Valve outlet connections |
| BS 341-4-2004 | 可运输气体容器的阀门.减压装置 | Transportable gas container valves - Pressure relief devices |
| BS 3457-1973 | 水龙头与截止阀座垫圈材料规范 | Specification for materials for water tap and stopvalve seat washers |
| BS 3727-1-1966 | 电子管和电子阀用镍的分析方法.第1部分:铝含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of aluminium (photometric method) |
| BS 3727-10-1964 | 电子管和电子阀用镍的分析方法.第10部分:0.020-0.25％硅含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.020-0.25 per cent (photometric method) |
| BS 3727-11-1965 | 电子管和电子阀用镍的分析方法.第11部分:0.001-0.020％硅含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of silicon 0.001-0.020 per cent (photometric method) |
| BS 3727-12-1970 | 电子管和电子阀用镍的分析方法.硫含量测定(燃烧法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of sulphur (combustion method) |
| BS 3727-13-1965 | 电子管和电子阀用镍的分析方法.第13部分:钛含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of titanium (photometric method) |
| BS 3727-14-1964 | 电子管和电子阀用镍的分析方法.第14部分:钨含量测定(重量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of tungsten (gravimetric method) |
| BS 3727-15-1968 | 电子管和电子阀用镍的分析方法.第15部分:锌含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of zinc (photometric method) |
| BS 3727-16-1966 | 电子管和电子阀用镍的分析方法.第16部分:化合镁和游离镁含量测定 | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of combined and free magnesium |
| BS 3727-2-1968 | 电子管和电子阀用镍的分析方法.第2部分:硼含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of boron (photometric method) |
| BS 3727-20-1966 | 电子管和电子阀用镍的分析方法.第20部分:光谱法 | Methods for the analysis of nickel for use in electronic tubes and valves - Spectrographic method |
| BS 3727-21-1966 | 电子管和电子阀用镍的分析方法.第21部分:镁含量测定(原子吸收法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (atomic absorption method) |
| BS 3727-3-1966 | 电子管和电子阀用镍的分析方法.第3部分:碳含量测定 | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of carbon |
| BS 3727-4-1964 | 电子管和电子阀用镍的分析方法.第4部分:铬含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of chromium (photometric method) |
| BS 3727-5-1964 | 电子管和电子阀用镍的分析方法.第5部分:钴含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of cobalt (photometric method) |
| BS 3727-6-1964 | 电子管和电子阀用镍的分析方法.第6部分:铜含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of copper (photometric method) |
| BS 3727-7-1964 | 电子管和电子阀用镍的分析方法.第7部分:铁含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of iron (photometric method) |
| BS 3727-8-1964 | 电子管和电子阀用镍的分析方法.第8部分:锰含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of manganese (photometric method) |
| BS 3727-9-1967 | 电子管和电子阀用镍的分析方法.第9部分:镁含量测定(光度测量法) | Methods for the analysis of nickel for use in electronic tubes and valves - Determination of magnesium (photometric method) |
| BS 4062-2-1990 | 液压动力系统阀门.第2部分:性能测定方法 | Valves for hydraulic fluid power systems - Methods for determining performance |
| BS 4151-1967 | 输入信号为 3至15磅/平方英寸(压力计)的气动阀定位器的评定方法 | Method of evaluating pneumatic valve positioners with input signal of 3 to 15 lbf/in2 (gauge) |
| BS 4319-1-1968 | 电子管和电子阀(包括微波器件)电气特性测量方法.第1部分:测量等效输入和输出导纳的基本条件 | Methods of measurement of the electrical properties of electronic tubes and valves (excluding microwave devices) - Essential conditions for measuring equivalent input and output admittances |
| BS 5041-1-1987 | 消防栓系统设备.第1部分:湿式水嘴接地阀规范 | Fire hydrant systems equipment - Specification for landing valves for wet risers |
| BS 5041-2-1987 | 消防栓系统设备.第2部分:干式水嘴接地阀规范 | Fire hydrant systems equipment - Specification for landing valves for dry risers |
| BS 5041-4-1975 | 消防栓系统设备.第4部分:干式水嘴用接地阀箱规范 | Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers |
| BS 5158-1989 | 铸铁旋塞阀规范 | Specification for cast iron plug valves |
| BS 5159-1974 | 通用铸铁和碳钢球阀规范 | Specification for cast iron and carbon steel ball valves for general purposes |
| BS 5163-1-2004 | 水厂用阀.主要键操作的铸铁闸阀.操作规范 | Valves for waterworks purposes - Predominantly key-operated cast iron gate valves - Code of practice |
| BS 5163-2-2004 | 水厂用阀.隔离阀和相关控水设备用船首柱冠板.规范 | Valves for waterworks purposes - Stem caps for use on isolating valves and associated water control apparatus - Specification |
| BS 5353-1989 | 钢塞阀规范 | Specification for steel plug valves |
| BS 5433-1976 | 供水用地下闸阀规范 | Specification for underground stopvalves for water services |
| BS 5672-1991 | 往复式内燃机汽缸头的汽缸和阀旋转方向标示和左、右单列发动机定义的规范 | Specification for designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine for reciprocating internal combustion engines |
| BS 5793-4-1987 | 工业过程控制阀.第4部分:检验和例行试验规范 | Industrial-process control valves - Specification for inspection and routine testing |
| BS 5944-4-1984 | 液压动力系统和部件空气噪音测量.第4部分:流量和压力控制阀声功率级测定方法 | Measurement of airborne noise from hydraulic fluid power systems and components - Method of determining sound power levels from valves controlling flow and pressure |
| BS 5998-1983 | 钢阀铸件的质量级规范 | Specification for quality levels for steel valve castings |
| BS 6023-1980 | 自动疏水阀的技术术语词汇 | Glossary of technical terms for automatic steam traps |
| BS 6282-1-1982 | 防止回流水污染用带动件装置.第1部分:公称尺寸小于等于DN54的单向阀规范 | Devices with moving parts for the prevention of contamination of water by backflow - Specification for check valves of nominal size up to and including DN 54 |
| BS 6282-2-1982 | 防止回流水污染用带动件装置.第2部分:公称尺寸小于等于DN54的终端反压力阀规范 | Devices with moving parts for the prevention of contamination of water by backflow - Specification for terminal anti-vacuum valves of nominal size up to and including DN 54 |
| BS 6282-4-1982 | 防止回流水污染用带动件装置.第4部分:公称尺寸小于等于DN42的组合单向阀和反压力阀规范 | Devices with moving parts for the prevention of contamination of water by backflow - Specification for combined check and anti-vacuum valves of nominal size up to and including DN 42 |
| BS 6283-2-1991 | 热水系统安全控制装置.第2部分:压力范围从1bar到10bar的温度减压阀规范 | Safety and control devices for use in hot water systems - Specifications for temperature relief valves for pressures from 1 bar to 10 bar |
| BS 6283-4-1991 | 热水系统中安全控制装置.第4部分:最大供给压力不超过12bar、标准尺寸不超过DN50的放松减压阀规范 | Safety and control devices for use in hot water systems - Specification for drop-tight pressure reducing valves of nominal size up to and including DN 50 for supply pressures up to and including 12 bar |
| BS 6290-4-1997 | 铅酸固定电池和电池组.阀门调节类型分类规范 | Lead-acid stationary cells and batteries - Specification for classifying valve regulated types |
| BS 6364-1984 | 制冷设备用阀门规范 | Specification for valves for cryogenic service |
| BS 6675-1986 | 供水设备用供水阀门(铜合金)规范 | Specification for servicing valves (copper alloy) for water services |
| BS 6683-1985 | 阀门安装和使用指南 | Guide to installation and use of valves |
| BS 7016-3-1988 | 往复式内燃机部件和系统.第3部分:阀门、凸输轴传动和驱动机构的术语词汇 | Components and systems of reciprocating internal combustion engines - Glossary of terms for valves, camshaft drive and actuating mechanisms |
| BS 7296-1-1990 | 液压动力卡盘式阀的空腔.第1部分:二通镶套滑动阀规范 | Cavities for hydraulic fluid power cartridge valves - Specification for two-port slip-in valves |
| BS 7350-1990 | 加热和冷却水系统用双调节球形阀和流量测量装置规范 | Specification for double regulating globe valves and flow measurement devices for heating and chilled water systems |
| BS 7403-2-1998 | 内燃机满液流润滑油过滤器.元件分支阀特性试验方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for element by-pass valve characteristics |
| BS 7403-9-1995 | 内燃机用全流式润滑油过滤器.入口和出口防泄油阀试验方法 | Full-flow lubricating oil filters for internal combustion engines - Method of test for inlet and outlet anti-drain valves |
| BS 7438-1991 | 弹簧加载型钢和铜合金单盘压片止回阀规范 | Specification for steel and copper alloy wafer check valves, single-disk, spring-loaded type |
| BS 7461-1991 | 装有流量调节器、闭路开关检验、闭合位置指示开关或气流量控制器电动式气体自动关闭阀规范 | Specification for electrically operated automatic gas shut-off valves fitted with throughput adjusters, proof of closure switches, closed position indicator switches or gas flow control |
| BS 7478-1991 | 恒温散热器阀的选择和使用指南 | Guide to selection and use of thermostatic radiator valves |
| BS 759-1-1984 | 锅炉与锅炉连接管路用阀门、水位计及其它安全管件.第1部分:阀门、安装件和管件规范 | Valves, gauges and other safety fittings for application to boilers and to piping installations for and in connection with boilers - Specification for valves, mountings and fittings |
| BS 7942-2000 | 检修机构用恒温混合阀 | Thermostatic mixing valves for use in care establishments |
| BS AU 50-3.1e-2002 | 轮胎和车轮.阀门.尺寸、名称与符号、使用中阀门压力等级和夹紧阀门扭矩 | Tyres and wheels - Valves - Dimensions, designation, valve pressure ratings by use and torque for clamp-in valves |
| BS C 22-1995 | 航空用内胎轮胎和无内胎轮胎阀的试验方法.气门芯和帽 | Test methods for aircraft inner tube and tubeless tyre valves - Cores and caps |
| BS C 9-1970 | 航空用高压充气阀连接尺寸规范 | Specification for coupling dimensions for high pressure air charging valves for aircraft |
| BS EN 10090-1998 | 内燃机用阀门钢和合金 | Valve steels and alloys for internal combustion engines |
| BS EN 1074-1-2000 | 供水用阀门.对目的要求的符合性及合适的验证试验.一般要求 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - General requirements |
| BS EN 1074-2-2000 | 供水用阀门.对目的要求的符合性及合适的验证试验.截止阀 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Isolating valves |
| BS EN 1074-3-2000 | 供水用阀门.对目的要求的符合性及合适的验证试验.止回阀 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Check valves |
| BS EN 1074-4-2000 | 供水系统用的阀门.产品与用途要求的适用性和合适的验证试验.空气阀 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Air valves |
| BS EN 1074-5-2001 | 供水阀门.与用途要求的适用性和合适的验证试验.控制阀门 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Control valves |
| BS EN 1074-6-2004 | 供水用阀门.目的要求和适当检定试验的合理性.给水栓 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Hydrants |
| BS EN 1092-1-2002 | 法兰及其连接.按PN标示的管、阀门、配件和附件用的圆形法兰.钢法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Steel flanges |
| BS EN 1092-2-1997 | 法兰及其连接.按PN标注的管、阀门、管接头和附件的圆形安装法兰.第2部分:铸铁法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Cast iron flanges |
| BS EN 1092-3-2004 | 法兰及其连接件.标注PN的管道、阀门、配件和附件用圆形法兰.铜合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Copper alloy flanges |
| BS EN 1092-4-2002 | 法兰及其连接件.按PN标注的管道、阀门、配件和附件用圆形法兰.铝合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Aluminium alloy flanges |
| BS EN 1111-1999 | 卫生用具龙头.恒温混合阀(PN10).一般技术规范 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| BS EN 1171-2002 | 工业阀门.铸铁闸阀 | Industrial valves - Cast iron gate valves |
| BS EN 12050-4-2001 | 建筑物和工地用废水处理设备.施工和试验规则.不含粪便和含有粪便的废水用止回阀 | Wastewater lifting plants for buildings and sites - Principles of construction and testing - Non-return valves for faecal-free wastewater and wastewater containing faecal matter |
| BS EN 12094-13-2001 | 固定消防系统.气体灭火系统元件.止回阀和非止回阀试验方法和要求 | Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for check valves and non-return valves |
| BS EN 12094-4-2004 | 固定式消防系统.气体灭火系统用元件.容器阀组件及其传动器的要求和试验方法 | Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for container valve assemblies and their actuators |
| BS EN 12100-1998 | 塑料管道系统.聚乙稀(PE)阀门.阀座间抗弯曲性的试验方法 | Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to bending between supports |
| BS EN 12106-1998 | 塑料管道系统.聚乙稀(PE)阀门.挤压后抗内压力的试验方法 | Plastics piping systems - Polyethylene (PE) pipes - Test method for the resistance to internal pressure after application of squeeze-off |
| BS EN 12107-1998 | 塑料管道系统.注射模塑热塑性塑料管件、阀门和辅助设备.注射模塑管道元件用热塑性材料的长期液压强度的测定 | Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of thermoplastics materials for injection moulding of piping components |
| BS EN 12117-1998 | 塑料管道系统.管件、阀门和附件.气体流速与压降之间关系的测定 | Plastics piping systems - Fittings, valves and ancillaries - Determination of gaseous flow rate/pressure drop relationships |
| BS EN 12119-1997 | 塑料管道系统.聚乙烯(PE)阀.耐力热循环抗性的测试方法 | Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling |
| BS EN 1213-2000 | 建筑物阀门.建筑物内饮水供水用的铜合金断流阀.试验和要求 | Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements |
| BS EN 12201-4-2002 | 供水用塑料管道系统.聚乙烯.阀门 | Plastic piping systems for water supply - Polyethylene (PE) - Valves |
| BS EN 12259-2-1999 | 固定灭火系统.喷洒器和喷水系统元部件.报警湿阀组件 | Fixed firefighting systems - Components for sprinkler and water spray systems - Wet alarm valve assemblies |
| BS EN 12259-3-2000 | 固定灭火系统.喷洒器和喷水系统用元部件.报警干阀组件 | Fixed firefighting systems - Components for sprinkler and water spray systems - Dry alarm valve assemblies |
| BS EN 12266-1-2003 | 工业用阀门.阀门试验.压力试验、试验规程和验收标准.强制要求 | Industrial valves - Testing of valves - Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| BS EN 12266-2-2002 | 工业用阀门.阀门试验.试验、试验规程和验收标准.补充要求 | Industrial valves - Testing of valves - Tests, test procedures and acceptance criteria - Supplementary requirements |
| BS EN 12284-2003 | 冷却系统和加热泵.阀.要求、试验及标记 | Refrigerating systems and heat pumps - Valves - Requirements, testing and marking |
| BS EN 12288-2003 | 工业用阀.铜合金闸阀 | Industrial valves - Copper alloy gate valves |
| BS EN 12334-2001 | 工业阀门.铸铁单向阀门 | Industrial valves - Cast iron check valves |
| BS EN 12351-1999 | 工业阀门.带法兰连接的阀门保护帽 | Industrial valves - Protective caps for valves with flanged connections |
| BS EN 12380-2002 | 排水系统用进气阀.要求、试验方法和合格评定 | Air admittance valves for drainage systems - Requirements, test methods and evaluation of conformity |
| BS EN 12514-2-2000 | 油燃烧器供油系统的安装.安全性要求和试验.部件、阀门、管道、过滤器、油空气分离器、油量计 | Installations for oil supply systems for oil burners - Safety requirements and tests - Parts, valves, pipes, filters, oil de-aerators, meters |
| BS EN 12516-1-2005 | 工业阀门.外壳设计强度.钢制阀门外壳的列表法 | Industrial valves - Shell design strength - Tabulation method for steel valve shells |
| BS EN 12516-2-2004 | 工业阀门.外壳设计强度.钢制阀门外壳的计算方法 | Industrial vales - Shell design strength - Calculation method for steel valve shells |
| BS EN 12516-3-2002 | 阀门.外壳设计强度.实验方法 | Valves - Shell design strength - Experimental method |
| BS EN 12541-2003 | 卫生设备配件.压力冲洗阀和自动关闭便池冲水阀PN10 | Sanitary tapware - Pressure flushing valves and automatic closing urinal valves PN 10 |
| BS EN 12567-2000 | 工业阀门.液化天然气用隔离阀.适用性验证试验规范 | Industrial valves - Isolating valves for LNG - Specification for suitability and appropriate verification tests |
| BS EN 12569-1999 | 工业阀门.化学和石油化学工艺工业阀门.要求和试验 | Industrial valves - Valves for chemical and petrochemical process industry - Requirements and tests |
| BS EN 12570-2000 | 工业阀门.操作元件尺寸控制方法 | Industrial valves - Method for sizing the operating element |
| BS EN 12627-1999 | 工业阀门.钢阀门的对接焊接端 | Industrial valves - Butt welding ends for steel valves |
| BS EN 1267-1999 | 阀门.用水作为试验流体的耐流动性能试验 | Valves - Test of flow resistance using water as a test fluid |
| BS EN 12760-1999 | 阀门.钢阀门的套节焊接端 | Valves - Socket welding ends for steel valves |
| BS EN 1286-1999 | 卫生排水塞.低压机械混合阀.一般技术规范 | Sanitary tapware - Low pressure mechanical mixing valves - General technical specification |
| BS EN 1287-1999 | 卫生排水塞.低压恒温混合阀.一般技术规范 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specifications |
| BS EN 12982-2000 | 工业阀门.对焊尾阀一端至另一端和中心到端面的尺寸 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| BS EN 13082-2001 | 危险品运输罐.装罐设备.蒸汽传输阀门 | Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve |
| BS EN 13152-2002 | 液化石油气瓶阀门规范和测试.自闭锁 | Specification and testing of LPG cylinder valves - Self closing |
| BS EN 13153-2002 | 液化石油气瓶阀门规范和测试.手动操作 | Specification and testing of LPG cylinder valves - Manually operated |
| BS EN 13175-2003 | 液化石油气(LPG)罐阀和配件的规范和试验 | Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings |
| BS EN 13244-4-2003 | 一般用途、排水和排污水的地下或地面压力系统用塑料管道系统.聚乙烯.阀门 | Plastics piping systems for buried and above-ground pressure systems for water for general purposes, drainage and sewerage - Polyethylene (PE) - Valves |
| BS EN 13308-2002 | 危险物品运输用槽罐车.槽罐车用辅助设备.无压力平衡底阀 | Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve |
| BS EN 13312-5-2001 | 生物技术.管道和仪表性能标准.阀门 | Biotechnology - Performance criteria for piping and instrumentation - Valves |
| BS EN 13316-2002 | 危险物品运输用槽罐车.槽罐车用辅助设备.压力平衡底阀 | Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve |
| BS EN 13397-2002 | 工业阀.金属材料制隔膜阀 | Industrial valves - Diaphragm valves made of metallic materials |
| BS EN 1349-2000 | 工业用工序控制阀门 | Industrial process control valves |
| BS EN 13617-3-2004 | 加油站.剪切阀的结构和性能的安全要求 | Petrol filling stations - Safety requirements for constuction and performance of shear valves |
| BS EN 13648-1-2002 | 冷凝容器.防超压安全保护装置.冷凝设备的安全阀 | Cryogenic vessels - Safety devices for protection against excessive pressure - Safety valves for cryogenic service |
| BS EN 1366-2-1999 | 服务设施的耐火试验.防火阀 | Fire resistance tests for service installations - Fire dampers |
| BS EN 13709-2003 | 工业用阀.钢制球阀、球状截止阀和止回阀 | Industrial valves - Steel globe and globe stop and check valves |
| BS EN 13774-2003 | 最大工作压力小于或等于16巴的配气系统用阀门.性能要求 | Valves for gas distribution systems with maximum operating pressure less than or equal to 16 bar - Performance requirements |
| BS EN 13786-2004 | 丁烷、丙烷或它们的混合物用最大输出压力4巴及以下和100 kg/h及以下容积的自动转换阀及其相关安全设备 | Automatic change-over valves having a maximum outlet pressure of up to and including 4 bar with a capacity of up to and including 100 kg/h, and their associated safety devices for butane, propane or their mixtures |
| BS EN 13789-2003 | 工业用阀.铸铁球阀 | Industrial valves - Cast iron globe valves |
| BS EN 13792-2002 | 实验室内用水龙头和阀门的识别色码 | Colour coding of taps and valves for use in laboratories |
| BS EN 13828-2003 | 建筑物用阀.建筑物内饮用水供给用手动铜合金及不锈钢球阀.试验及要求 | Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements |
| BS EN 13942-2003 | 石油和天然气工业.管道输送.管道阀 | Petroleum and natural gas industries - Pipeline transportation - Pipeline valves |
| BS EN 13953-2003 | 液化石油气(LPG)用移动式可填充储气瓶的减压安全阀 | Pressure relief valves for transportable refillable cylinders for liquefied petroleum gas (LPG) |
| BS EN 14071-2004 | LPG罐用减压阀.辅助设备 | Pressure relief valves for LPG tanks - Ancillary equipment |
| BS EN 14124-2004 | 带内溢流口的冲洗水箱的进水阀 | Inlet valves for flushing cisterns with internal overflow |
| BS EN 14129-2004 | LPG罐用减压阀 | Pressure relief valves for LPG tanks |
| BS EN 14141-2003 | 天然气输送用管道阀.性能要求和试验 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| BS EN 14189-2003 | 可运输气瓶.气瓶定期检查时气瓶阀的检查和维修 | Transportable gas cylinders - Inspection and maintenance of cylinder valves at time of periodic inspection of gas cylinders |
| BS EN 14382-2005 | 气压调节站和装置用安全设备.进气口压力100巴及以下的气体安全截止阀 | Safety devices for gas pressure regulating stations and installations — Gas safety shut-off devices for inlet pressures up to 100 bar |
| BS EN 144-1-2000 | 呼吸保护装置.气瓶阀.插入式连接器用螺纹连接 | Respiratory protective devices - Gas cylinder valves - Thread connections for insert connector |
| BS EN 144-2-1999 | 呼吸保护装置.气瓶阀.出口连接 | Respiratory protective devices - Gas cylinder valves - Outlet connections |
| BS EN 144-3-2003 | 呼吸保护装置.气瓶阀.潜水用Nitrox和氧气气瓶的出口接头 | Respiratory protective devices - Gas cylinder valves - Outlet connections for diving gases Nitrox and oxygen |
| BS EN 1452-4-2000 | 供水塑料管道系统.非增塑的聚氯乙烯(PVC-U).阀门和附属设备 | Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Valves and ancillary equipment |
| BS EN 14529-2005 | 呼吸保护装置.逃生用包含由需求阀控制的正压呼吸器的带半罩式面具的自持式开路压缩气体呼吸机 | Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only |
| BS EN 14593-1-2005 | 呼吸防护装置.带用量阀的压缩空气管路呼吸装置.全罩式装置.要求、检验和标记 | Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a full mask - Requirements, testing, marking |
| BS EN 14593-2-2005 | 呼吸防护装置.带用量阀的压缩空气管路呼吸装置.在正压下半罩式装置.要求、检验和标记 | Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Apparatus with a half mask at positive pressure - Requirements, testing, marking |
| BS EN 14596-2005 | 危险物品运输用罐.罐用辅助设备.应急减压阀 | Tanks for transport of dangerous goods - Service equipment for tanks - Emergency pressure relief valve |
| BS EN 14848-2005 | 气溶胶容器.25.4 mm孔径的金属容器.阀座尺寸 | Aerosol containers — Metal containers with 25,4 mm aperture — Dimensions of valve cups |
| BS EN 14849-2005 | 气溶胶容器.玻璃容器.气溶胶阀门金属箍尺寸 | Aerosol containers — Glass containers — Dimensions of aerosol valve ferrules |
| BS EN 1487-2000 | 建筑物阀门.液压安全组.试验和要求 | Building valves - Hydraulic safety groups - Tests and requirements |
| BS EN 1488-2000 | 建筑物阀门.膨胀组.试验和要求 | Building valves - Expansion groups - Tests and requirements |
| BS EN 1489-2000 | 建筑物阀门.安全阀.试验和要求 | Building valves - Pressure safety valves - Tests and requirements |
| BS EN 1490-2000 | 建筑物阀门.温度和压力结合型的释放阀门.试验和要求 | Building valves - Combined temperature and pressure relief valves - Tests and requirements |
| BS EN 1491-2000 | 建筑物阀门.膨胀阀门.试验和要求 | Building valves - Expansion valves - Tests and requirements |
| BS EN 1503-1-2000 | 阀门.阀门体、帽和盖用材料.欧洲标准中规定的钢材 | Valves - Materials for bodies, bonnets and covers - Steels specified in European Standards |
| BS EN 1503-2-2000 | 阀门.阀门体、帽和盖用材料.欧洲标准中规定之外的钢材 | Valves - Materials for bodies, bonnets and covers - Steels other than those specified in European Standards |
| BS EN 1503-3-2000 | 阀门.阀门体,帽和盖用材料.欧洲标准中规定的铸铁 | Valves - Materials for bodies, bonnets and covers - Cast irons specified in European Standards |
| BS EN 1503-4-2002 | 阀门.阀体、阀帽和阀盖用材料.欧洲标准中规定的铜合金 | Valves - Materials for bodies, bonnets and covers - Copper alloys specified in European Standards |
| BS EN 1555-4-2004 | 供应气体燃料用塑料管道系统.聚乙烯(PE).阀门 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Valves |
| BS EN 1567-2000 | 建筑物阀门.供水减压阀和组合减压阀.要求和试验 | Building valves - Water pressure reducing valves and combination water reducing valves - Requirements and tests |
| BS EN 161-2002 | 气体燃烧器和燃气器具自动关闭阀 | Automatic shut-off valves for gas burners and gas appliances |
| BS EN 1626-1999 | 制冷容器.制冷用阀门 | Cryogenic vessels - Valves for cryogenic service |
| BS EN 1643-2000 | 燃气燃烧装置和燃气器具的自动关闭阀的阀门检验系统 | Valve proving systems for automatic shut-off valves for gas burners and gas appliances |
| BS EN 1680-1997 | 塑料软管系统.聚乙烯(PE)管道系统用的阀门.弯曲力施加在工作机构上和之后的密封性的检验方法 | Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for leaktightness under and after bending applied to the operating mechanism |
| BS EN 1704-1997 | 塑料管道系统.热塑料管阀.弯曲情况下温度循环后阀门完整性的试验方法 | Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after temperature cycling under bending |
| BS EN 1705-1997 | 塑料管道系统.热塑性阀门.经过外部冲击后阀门的完整性试验方法 | Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow |
| BS EN 1751-1999 | 建筑物通风.出气口设备.减振器和阀的空气动力学试验 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves |
| BS EN 1759-1-2004 | 法兰及其连接件.等级标示的管、阀门、配件和附件用环形法兰.NPS 1/2到24 钢法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class-designated - Steel flanges, NPS 1/2 to 24 |
| BS EN 1759-3-2004 | 法兰及其连接件.标注等级的管道、阀门、配件和附件用圆形法兰.铜合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Copper alloy flanges |
| BS EN 1759-4-2003 | 法兰及其连接件.标注等级的管道、阀门、配件及附件用圆形法兰.铝合金法兰 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, class designated - Aluminium alloy flanges |
| BS EN 1827-1999 | 呼吸保护装置.防气体或气体和颗粒或只防颗粒的无吸气阀带分离式过滤器的半面罩.要求、试验和标记 | Respiratory protective devices - Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only - Requirements, testing, marking |
| BS EN 19-2002 | 工业阀门.金属阀门的标志 | Industrial valves - Marking of metallic valves |
| BS EN 1984-2000 | 工业阀门.钢插板阀门 | Industrial valves - Steel gate valves |
| BS EN 215-2004 | 恒温散热器控制阀.要求和试验方法 | Thermostatic radiator valves - Requirements and test methods |
| BS EN 26553-1991 | 自动凝汽阀标志规范 | Specification for marking of automatic steam traps |
| BS EN 26554-1991 | 法兰式自动凝汽阀的面对面尺寸规范 | Specification for face-to-face dimensions for flanged automatic steam traps |
| BS EN 26704-1991 | 自动凝汽阀分类 | Classification of automatic steam traps |
| BS EN 26948-1991 | 自动凝汽阀生产和性能特点试验规范 | Specification for production and performance characteristic tests for automatic steam traps |
| BS EN 27841-1991 | 自动凝汽阀蒸汽损失的测定方法 | Methods for determination of steam loss of automatic steam traps |
| BS EN 27842-1991 | 自动凝汽阀排放量的测定方法 | Methods for determination of discharge capacity of automatic steam traps |
| BS EN 28233-1992 | 热塑性塑料阀门的扭矩试验方法 | Thermoplastics valves - Torque - Test method |
| BS EN 28659-1992 | 热塑性塑料阀门.疲劳强度.试验方法 | Thermoplastics valves - Fatigue strength - Test method |
| BS EN 331-1998 | 建筑物燃气供应设备用手动球阀和密封底部锥体旋塞阀 | Manually operated ball valves and closed bottom taper plug valves for gas installations in buildings |
| BS EN 405-2002 | 呼吸保护装置.防气体或防气体和颗粒的阀滤式半面罩.要求、试验和标记 | Respiratory protective devices - Valved filtering half masks to protect against gases or gases and particles - Requirements, testing, marking |
| BS EN 417-1992 | 与便携式灶具配用的带有或不带阀门的一次性金属液化石油气瓶.制作、检验、试验和标记 | Non-refillable metallic gas cartridges for liquefied petroleum gases, with or without a valve, for use with portable appliances - Construction, inspection, testing and marking |
| BS EN 45510-7-1-2000 | 发电站设备采购指南.管道系统和阀门.高压管道系统.第1节:高压管道系统 | Guide for the procurement of power station equipment - Pipework and valves - High pressure piping systems - Section 1: High pressure piping systems |
| BS EN 45510-7-2-2000 | 发电站设备采购指南.管道系统和阀门.锅炉和高压阀门.第2节:锅炉和高压阀门 | Guide for the procurement of power station equipment - Pipework and valves - Boiler and high pressure valves - Section 2: Boiler and high pressure valves |
| BS EN 488-2003 | 区域供暖管道.直埋式热水供应网用预先绝热包覆的管道系统.聚氨基甲酸乙酯热绝缘和聚乙烯外覆层钢管用钢阀门 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 50216-8-2005 | 电力变换器和电抗器附件.绝缘液电路用蝶阀 | Power transformer and reactor fittings — Part 8: Butterfly valves for insulating liquid circuits |
| BS EN 558-1-1996 | 工业用阀.法兰管系统使用的金属阀的面至面和中心至面的尺寸.PN设计阀 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN-designated valves |
| BS EN 558-2-1996 | 工业用阀.法兰管系统使用的金属阀.面至面和中心至面的尺寸.分类设计阀 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - Class-designated valves |
| BS EN 561-2002 | 气焊设备.焊接、切割和类似加工工艺用断路阀门快速连接器 | Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and allied processes |
| BS EN 593-2004 | 工业阀门.金属蝶阀 | Industrial valves - Metallic butterfly valves |
| BS EN 60534-1-2005 | 工业过程控制阀.控制阀术语和一般考虑 | Industrial-process control valves - Control valve terminology and general considerations |
| BS EN 60534-2-1-1999 | 工业过程控制阀 .流量.在安装条件下确定流体流量的规模方程 | Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid flow under installed conditions |
| BS EN 60534-2-3-1998 | 工业过程控制阀.流量.试验程序 | Industrial-process control valves - Flow capacity - Test procedures |
| BS EN 60534-2-5-2003 | 工业过程控制阀.流通能力.通过有段间恢复功能的多段控制阀的流体流量的校准公式 | Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through multistage control valves with interstage recovery |